Faculty research output is compiled from the college research database and listed by department. Supervisors approved for postgraduate research are shown where recorded.
Peer-reviewed and conference publications by college faculty.
| Sl. No. | Title | Authors | Journal / conference | Year | Download |
|---|---|---|---|---|---|
| 1 | Effect of AW and PWHT on Properties of Laser Beam Welded Ti/Al Dissimilar Joint | Kalaiselvan K, Sekar K Mathiazhagan N & Elavarasi | Journal of Manufacturing Technology Research, Nova Science Publishers, Vol. 13, Issue 3-4. | — | — |
| 2 | A Review on Process Parameters of Ti/Al Dissimilar Joint Using Laser Beam Welding | Kalaiselvan K, Sekar K & Elavarasi | International Journal of Mechanical and Materials Engineering, World Academy of Science, Engineering and Technology,Vol:15, No:6. pp. 255-262. | — | — |
| 3 | Influence of LBW parameters on properties of Ti6Al4V/AA2024 dissimilar alloy joint | Kalaiselvan K, Elango A, Nagarajan NM & Sekar | Indian Journal of Engineering & Materials Sciences, CSIR-NISCAIR. Vol.25, pp.445-449. | — | — |
| 4 | Experimental investigation on mechanical and distortion characteristics of Ti/Al dissimilar metal joint using laser beam welding | Kalaiselvan K, Elango A,Nagarajan NM& Sekar | Journal of Advanced Manufacturing System, World Scientific Publishers,Vol.17. no 4, pp. 569-579. | — | — |
| 5 | 2018,'Studies on weldment performance of Ti/Al dissimilar sheet metal joints using laser beam welding | Kalaiselvan K, Elango A, Nagarajan NM, Mathiazhagan N & VigneshKannan | Coupled Systems Mechanics, Techno-Press, ISSN:2234-2184,. | — | — |
| 6 | Before and after Heat Treatment on Weldment of Ti/Al Laser Beam Dissimilar Joints | Kalaiselvan K, Elango A,Nagarajan NM & Sekar | Journal of Machining and Forming Technologies Research, Nova Science Publishers, Vol. 9, Issue 1-2. | — | — |
| 7 | Effect of heat treatment on mechanical properties and microstructure of Ti/Al sheet metal joint using laser beam welding | Kalaiselvan K, Elango A,Nagarajan NM, Sekar K & Mathiazhagan | International Journal of Additive and Subtractive Materials Manufacturing, ISSN: 2057-4983, Inderscience, Vol.2. no 1, pp 13-24. | — | — |
| 8 | Weldability of Ti/Al dissimilar sheet metal joints using Nd: YAG Pulsed laser | Kalaiselvan K, Elango A,Nagarajan NM & Sekar | International Journal ofMaterials, NAUN.org Journals, ISSN: 2313-0555, vol. 4, pp.31-35. | — | — |
| 9 | Studies on Interlayer Characteristics of Ti/Al Dissimilar Metal Joints Using Laser Beam | Kalaiselvan K, Elango A,Nagarajan NM, Sekar K & Mathiazhagan | Journal of Manufacturing Technology Research, Nova Science Publishers, ISSN: 1943-8095, Vol. 9, Issue 1-2. | — | — |
| 10 | Weld speed effects on quality of Ti/Al dissimilar metal joints using Laser beam welding | Kalaiselvan K, Elango A & Nagarajan | International Journal ofAdditive and Subtractive Materials Manufacturing, ISSN: 2057-4983, Inderscience,Vol.1, no.1pp.47-66. | — | — |
| 11 | Microstructure and EDS analysis on Titanium/Aluminium dissimilar laser welded joint subjected to age hardening | Kalaiselvan K, Elango A & Nagarajan | Indian Journal of Engineering & Materials Sciences, CSIR-NISCAIR. Vol.23, pp.377-382. | — | — |
| 12 | Studies on characteristics of Ti6Al4V/AA2024 dissimilar weld joint using laser beam focusing from AA2024 side | Kalaiselvan K, Elango A, Nagarajan NM & Sekar | Transaction of the Indian Institute of Metals, (Springer), ISSN:DOI: 10.1007/s12666-017-1036-7. | — | — |
| 13 | Fracture behavior and Interface microstructure studies on Ti/Al sheet metal joint using Laser beam welding | Kalaiselvan K, Elango A & Nagarajan | Asian Journal of Research in Social Sciences and Humanities, ISSN:2249-7315, Vol.7. pp.438-448. | — | — |
| 14 | Studies on weldment structure in Ti/Al dissimilar metal joints using Laser beam welding | Kalaiselvan K, Elango A & Nagarajan | International Journal ofInnovation and Scientific Research, ISSN: 2351-8014, vol. 21, no. 2, Apr, pp. 301-309. | — | — |
| 15 | SEM studies on age hardenedLaser welded dissimilar Ti/Al sheet metal weldments | Kalaiselvan K, Elango A, & Nagarajan | International Journal of Innovationand Scientific Research, ISSN: 2351-8014, vol. 21, no. 2 Apr, pp. 310-320. | — | — |
| 16 | Crack and surface morphology on dissimilar metal butt joints using laser beam welding | Kalaiselvan K, Elango A & Nagarajan | Journal of ManufacturingTechnology Research, Nova Science Publishers, ISSN: 1943-8095, Inc. vol. 7, no. 3-4. | — | — |
| 17 | Evaluation of strength and fracturemode along weldment of Ti/Al sheet metal joint using laser beam welding | Kalaiselvan K,Elango A & Nagarajan | InternationalJournal of Advanced Engineering Technology, ISSN: 0976- 3945, vol. VII/Issue I/Jan-March, pp. 15-18. | — | — |
| 18 | Studies of hardness distribution in Ti/Al dissimilar metal joints using laser beam welding | Kalaiselvan K, Elango A & Nagarajan | International Journal ofAdvanced Engineering Technology, ISSN: 0976- 3945, vol.VII/IssueI/Jan-March, pp.117-120. | — | — |
| 19 | Microstructural Analysis of Diffusion Bonding on Copper Stainless Steel | Sanoop Sebastian; Vijayananth Suyamburajan, | Materialstoday:Proceedings. Volume 37, Part 2, 2021 | — | — |
| 20 | Synthesis, processing and finite element analysis of CNT based polymer composites | Sanoop Sebastian; Vijayananth Suyamburaja, R.Kumar. | AIP Conference Proceedings. | — | — |
| 21 | Usage of alternative fuel in a boiler for cost reduction in a chemical industry. | Clement Tom Scaria, and Alvin Thariyath. | International Journal of Scientific and Research Publications 4.3 (2014): 1-4. | — | — |
| 22 | Optimization of Transportation Route for a Milk Dairy. | Clement Tom Scaria, and Jenson Joseph E. | International Journal of Engineering Research & Technology 3.11 (2014): 854-859. | — | — |
| 23 | Effect of process parameter on synthesizing of TiC reinforced Al7075 aluminium alloy nano composites. | Clement Tom Scaria, and R. Pugazhenthi. | Materials Today: Proceedings 37 (2021): 1978-1981. | — | — |
| 24 | Effect of process parameters on machining of Al-TiC metal matrix composites using RSM. | Pugazhenthi R., D. Sreeram, Clement Tom Scaria, G. Anbuchezhiyan, and P. Nanthakumar. | Materials Today: Proceedings 46 (2021): 3282-3287. | — | — |
| 25 | Experimental Investigation on Mechanical and Morphological Properties of AA6061 reinforced with Silicon Carbide | Prajul Raj | Material Today:Proceedings,Volume 37,Part 2,2021,Pages 2041-2047 | — | — |
| 26 | Performance evaluation of abrasive water jet machining on AA6061-B4C-hBN hybrid composites using Taguchi methodology | K.T. Sunu Surendran | 15. A. Gnanavelbabu, K.T. Sunu Surendran and K. Rajkumar, "Performance evaluation of abrasive water jet machining on AA6061-B4C-hBN hybrid composites using Taguchi methodology", Lecture Notes on Multidisciplinary Industrial Engineering, Springer, (2020), 651-660. | — | PDF / Link |
| 27 | Optimization of abrasive water jet machining parameters on AA6061/B4C/hBN hybrid composites using Grey-RSM | K.T. Sunu Surendran | 14. A. Gnanavelbabu, V.Arunachalam, K.T. Sunu Surendran and P.Saravanan, "Optimization of abrasive water jet machining parameters on AA6061/B4C/hBN hybrid composites using Grey-RSM", IOP Conf. Series: Materials Science and Engineering (2020), 764, 012011. | — | PDF / Link |
| 28 | Optimization of machining parameters in CNC turning of AA6061-B4C-CNT hybrid composites using Grey-fuzzy method | K.T. Sunu Surendran | 13. A. Gnanavelbabu, V.Arunachalam, K.T. Sunu Surendran and K. Rajkumar,"Optimization of machining parameters in CNC turning of AA6061-B4C-CNT hybrid composites using Grey-fuzzy method", IOP Conf. Series: Materials Science and Engineering (2020), 764, 012010. https://doi.org/10.1088/1757-899X/764/1/012010 | — | PDF / Link |
| 29 | Flexural Characterization of Foam Cored E-Glass Reinforced Smart Materials Using Artificial Neural Network | Manujesh B J , Prajna M R , Sham Aan M P , Majida C V, | Materials Today: Proceedings,Volume 5,Issue 10,Part1,2018,Pages 21305-21313,October 2018 DOI:10.1016/j.matpr.2018.06.533 | — | — |
| 30 | Optimization of laser trepanning parameters for mild steel by taguchi response surface methodology (T-RSM) | K.T. Sunu Surendran | 12. A. Gnanavelbabu, V. Arunachalam, K.T. Sunu Surendran, V.Dharaniya and K. Rajkumar,"Optimization of laser trepanning parameters for mild steel by taguchi response surface methodology (T-RSM)",Trends in Manufacturing and Engineering Management, Springer LNME (2021), 905-914. https://doi.org/10.1007/978-981-15-4745-4_78 | — | PDF / Link |
| 31 | Anomaly Detection Scheme for Intelligent Transportation System using RNN-RBM Model | Fahida A K | International Research Journel of Engineering and Technology(IRJET),Volume 8,Issue 2,February 2021 | — | — |
| 32 | Turning process characteristics of aluminium matrix hybrid composite using grey relational surface methodology | K.T. Sunu Surendran | 11. A. Gnanavelbabu, V. Arunachalam, K.T. Sunu Surendran, R. Saranraj and K. Rajkumar, "Turning process characteristics of aluminium matrix hybrid composite using grey relational surface methodology" Trends in Manufacturing and Engineering Management, Springer LNME(2021), 523-533. | — | PDF / Link |
| 33 | Optimization of CO2 laser cutting parameters for AA6061/B4C/hBN hybrid composites using taguchi-based response surface methodology | K.T. Sunu Surendran | 10. A. Gnanavelbabu, V. Arunachalam, K.T. Sunu Surendran, K. Rajkumar and E. Anandhababu, "Optimization of CO2 laser cutting parameters for AA6061/B4C/hBN hybrid composites using taguchi-based response surface methodology", Trends in Manufacturing and Engineering Management, Springer LNME (2021),111-122. | — | PDF / Link |
| 34 | Microstructure and mechanical properties of AZ91D/Al2O3 bimodal composite fabricated through stir-ultrasonic-squeeze casting process, | K.T. Sunu Surendran | 9. K.T. Sunu Surendran, A. Gnanavelbabu and K. Rajkumar, "Microstructure and mechanical properties of AZ91D/Al2O3 bimodal composite fabricated through stir-ultrasonic-squeeze casting process,"Materials Today Proceedings,(2021), 45(9),7822-7828. (Scopus). | — | PDF / Link |
| 35 | A correlation with microstructure, | K.T. Sunu Surendran | K.T. Sunu Surendran and A. Gnanavelbabu, "Efficacy of ultrasonic treatment for dispersing nanoparticles: A correlation with microstructure," Materials Today Proceedings, (2021) | — | PDF / Link |
| 36 | Influence of ultrasonicationpower on grain refinement, mechanical properties and wear behaviour ofAZ91D/nano-Al2O3 composites | K.T. Sunu Surendran | 7. A Gnanavelbabu, K.T. Sunu Surendran, S. Kumar,"Influence of ultrasonicationpower on grain refinement, mechanical properties and wear behaviour ofAZ91D/nano-Al2O3 composites", Materials Research Express, (2020), 7, 016544. | — | PDF / Link |
| 37 | Process optimization and studies on mechanical characteristics of AA2014/Al2O3 nanocomposites fabricated through ultrasonication assisted stir-squeeze casting | K.T. Sunu Surendran | 6. A Gnanavelbabu, K.T. Sunu Surendran and S. Kumar, "Process optimization and studies on mechanical characteristics of AA2014/Al2O3 nanocomposites fabricated through ultrasonication assisted stir-squeeze casting", International Journal of Metalcasting, (2021). | — | PDF / Link |
| 38 | Effect of ageing temperature on the corrosion behaviour of UHTC particulatesreinforced magnesium composites fabricated through ultrasonic assisted squeeze casting process | K.T. Sunu Surendran | 5. A. Gnanavelbabu, K.T. Sunu Surendran, P. Loganathan, "Effect of ageing temperature on the corrosion behaviour of UHTC particulatesreinforced magnesium composites fabricated through ultrasonic assisted squeezecasting process", Journal of Alloys and Compounds, (2021), 856, 158173. | — | PDF / Link |
| 39 | Mining user-aware rare STPS and Frequent Events from Social Media | Salmath Amina K P | International Journal of Computer Science Trends and Technology(IJCSTR),Volume 5,Issue 2-2017 | — | — |
| 40 | Tweet Clustering Using Bisecting K-means | Shameena Banu P , Anju C.R | International Journal of Innovative Research in Computer and Communication Engineering(IJIRCCE),Vol. 5, Issue 3, March 2017. | — | — |
| 41 | Tribological behaviour of AZ91D/ultra-high-temperature ceramic composites at room and elevated temperatures | K.T. Sunu Surendran | 4. K.T. Sunu Surendran and A. Gnanavelbabu, "Tribological behaviour of AZ91D/ultra-high-temperature ceramic composites at room and elevated temperatures",Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, (2022) 236(9), 1855-1870, | — | PDF / Link |
| 42 | Investigation on the tribocorrosion and electrochemical corrosion behaviour of AA2014/Al2O3 nanocomposites fabricated through ultrasonication coupled stir-squeeze casting method | K.T. Sunu Surendran | 3. A. Gnanavelbabu, X. Jerish Amul, K.T. Sunu Surendran, "Investigation on the tribocorrosion and electrochemical corrosion behaviour of AA2014/Al2O3 nanocomposites fabricated through ultrasonication coupled stir-squeeze casting method" Journal of Applied Electrochemistry, (2022) 52, 765–791. | — | PDF / Link |
| 43 | Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites | K.T. Sunu Surendran | 2. K.T. Sunu Surendran A. Gnanavelbabu, "Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, (2022). | — | PDF / Link |
| 44 | Tribological performance of AZ91D/HfCp magnesium composite prepared through stir-ultrasonic-squeeze casting technique | K.T. Sunu Surendran | 1. K.T. Sunu Surendran A. Gnanavelbabu, "Tribological performance of AZ91D/HfCp magnesium composite prepared through stir-ultrasonic-squeeze casting technique", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, (2022). | — | PDF / Link |
Funded project details will be published here when available.
Memoranda of understanding with industry and academic partners will be listed here when available.